This is a massive list. It is not sorted properly, partially because it is very difficult to sort suppliers appropriately. The best way to learn about all these suppliers is to visit them all in turn and get a feel for them. The only way a supplier makes it onto this list is because it was recommended by a friend of mine; they are all legit. I have tried to put the larger suppliers toward the top of every list but I have not entirely succeeded at that.
If you want to add to this list or to edit it, contact me at Lee at Lee dat org. Enjoy! - Lee
- 1 Other Resource Lists
- 2 Recycled Bicycles / Bike Parts
- 3 Industrial Supply
- 4 Electrical, Electronics and Embedded Computer Stuff
- 5 Mechanical
- 6 Metal
- 7 Misc
- 8 Recycled and Inexpensive Stuff
- 9 Plastics and Fiberglass
- 10 Soldering Tools
- 11 Hobby Shops
- 12 Local Wood Suppliers
- 13 Stickers and T-Shirts
- 14 Adhesives
- 15 Picture Printing
- 16 Inexpensive Furniture and the like
Other Resource Lists
A List of lists of suppliers
- http://themakermap.com/ a map of resources in the bay area. Also look here and here
- http://www.quut.com/berkeley-fabrication-resources/ Welding and metal fabrication resources in the San Francisco Bay Area
- http://mightyohm.com/wiki/resources:surplus Don't pay retail when you can recycle! MightyOhm (Jeff Keyzer) has a splendid wiki of surplus places all over North America
- The Crucible has an extensive Materials Resources page
- http://www.alibaba.com/ The official channel to find and buy from Chinese sources directly pretty much anything you can buy from China. Good luck.
- http://www.techasart.org/Resources.html Technology as Art resource list
- http://www.slack.com/elec.html Manuals and resources for lots and lots of older test equipment like oscilloscopes, signal generators, counters, and the like.
- http://amasci.com/surplus/surpcats.html Surplus Electronics Catalogs for Amateur Scientists
Recycled Bicycles / Bike Parts
- Box Dog Bikes 14th & Guerrero for bike parts and advice
- http://www.thebikehut.com/ The Bike Hut on Embarcadero
They carry lots of items for various professions
- http://mscdirect.com/ - Sort of like Mcmaster with a greater emphasis on machine tools
- http://www.robotmarketplace.com Robot Marketplace sells... robot parts!
- http://www.robotshop.com Robot Shop
- http://www.andymark.biz/ Robot parts, chassis, gears, batteries etc. Caters to FIRST Robotics
- http://www.bmius.com/ A real industrial surplus company. Used fancy scientific equipment and such. I haven't bought from them.
Electrical, Electronics and Embedded Computer Stuff
http://www.bgmicro.com/ a good electronics dealer. On 1-20-12 SWARM bought 15 gently used Yuasa 7ah batteries from them for $10 each delivered. :-) Tammie at BG Micro went the extra mile and emailed Lee, nicely suggesting the cheapest shipping option after the order had been completed. USPS Priority was cheaper than UPS for these crazy-heavy items.
http://moderndevice.com/ - The RBBB is a fine Arduino. Many other fine Arduino-hobby-like items
How to get Free Samples, Surplus, Parts Distributors, Direct from Manufacturers from LadyAda... Excellent
Electronics Local to San Francisco and the Bay Area
Jameco Electronics Large mail order supplier. They are in Belmont and can do Will-Call orders
Al Lasher Electronics in Berkeley. Old school nerd haven.
Radio Shack. They're everywhere and those cabinets in the back of the store can have a key item you need.
Torres Engineering 1136 El Camino Real San Carlos CA 94070 (650) 593 2200. Vacuum tube stuff and music
SMElectronics 16 West 42nd Ave. San Mateo, CA. Similar to e+ and Lashers
Electronics Plus 823 4th Street San Rafael, CA 94901 (415) 457-0466. a rather decent and rare real electronics store
Central Computer, downtown SF. They have lots of inexpensive general computing stuff.. hard drives and the like.
http://www.hobbyengineering.com/ in South San Francisco. "A supply store for people who want to build robots, electronic gadgets, kinetic art or anything else that moves, beeps or flashes."
Alameda County Computer Resource Center. Until 2010 this was a good place to hunt through e-waste in Berkeley. Now in 2011 the status isn't known. James Burgett is no longer involved with ACCRC, and the building in Berkeley once filled with stacks of awesome equipment is no longer rented by ACCRC, instead they only have a parking lot at 620 Page St staffed with hourlies accepting e-waste into shipping containers for the appropriate fee. ACCRC still has a larger facility in Marin, but I have never been there and can't say what it's like.
Ace Liquidators in Alameda - New, reconditioned and obsolete breakers. Motor control, push buttons, starters, contact kits, relays, heater elements, wire, lighting and fasteners http://tinyurl.com/2bmkvp (or)
Universal Electric supply - 438 8th Street San Francisco, CA 94103 (415) 621-1888. Mostly electrical stuff
HDB Electronics - great small electronics parts etc, 9a-5pm retail in Redwood City. Can get many catalog parts in 2 days. Very helpful staff. Closed Jan 2009
Here's a great list of Bay Area electronic surplus stores (via) Check the page because he talks in detail about each store:
- Anchor Electronics 2040 Walch Ave. Santa Clara, CA Hours: 7:30 to 4:00 M-F, 10:00 to 3:00 Sat Web: http://www.anchor-electronics.com
- Action Components & Surplus (now Action Computers) 520 N. Lawrence Expy. #307 Sunnyvale, CA Hours: 10:00 to 6:00 M-Sat Web: http://www.actioncomputerstore.com
- Advanced Component Electronics (ACE) 1810 Oakland Rd. – Suite C San Jose, CA Hours: 8:00 to 4:30 M-F Web: http://www.acecomponents.com
- Excess Solutions 156 S. Milpitas Blvd. Milpitas, CA Hours: 8:00 to 6:00 M-F Web: http://www.excesssolutions.com
- Fry’s Electronics 1077 East Arques Ave. Sunnyvale, CA Hours: 8:00 to 9:00 M-F, 9:00 to 9:00 Sat, 9:00 to 7:00 Sun Web: http://www.frys.com
- HSC Electronics (was Halted Specialties at one time) 3500 Ryder St. Santa Clara, CA Hours: 8:00 to 7:00 M-F, 9:00 to 5:00 Sat Web: http://www.halted.com
- Weirdstuff Warehouse 384 Caribbean Dr. (near the north end of Mathilda) Sunnyvale, CA Hours: 9:30 to 6:00 M-Sat, 11:00 to 5:00 Sun Web: http://www.weirdstuff.com
Electronics parts aggregatators: http://findchips.com, http://octopart.com and http://datasheets360.com (I haven't tried datasheets360 yet) aggregate the catalogs of many electronics catalogs and help you find datasheets
Digikey One of the big boys of electronics parts, hundreds of thousands of parts. Good online catalog, though can be hard to narrow down your choice.
Mouser One of the big boys of electronics parts, hundreds of thousands of parts
Newark Electronics One of the big boys of electronics parts, hundreds of thousands of parts.
Jameco A smaller catalog, designed to be easier to sort through at the expense of (mind boggling) selection.
Sparkfun great electronics parts store for hobbyists and then some!
http://www.waytekwire.com/ for wires and related stuff. I haven't bought from them but they look good.
http://robotpower.com nice prebuilt motor controllers
http://www.alltronics.com/ Alltronics -- Mail order place from Morgan Hill. Sometimes odd pricing ($5 for a blue LED? $25 for a Tek storage scope?) but seems to scavenge the semiconductor industry and you can find stuff there you won't find elsewhere.
Reynolds Electronics for RF Remote Control (Lynx RF units) and PIC Micro Controllers
http://surplussales.com Surplus Sales is a great place to find older school electronic and mechanical components. They also sell lots of stuff from the vacuum tube days! They've got magnet wire perfect for tesla coils
Electronix Express: lots of electronics and supplies at good prices, specializes in supplying schools. Lee bought here April 2009 and was very happy
Hosfelt Electronics - mail order parts, sometimes pretty cheap. In Ohio.
MPJA - Marlin P. Jones & Assoc. - mail order place in Florida. New and used. Inexpensive
http://www.electrical-supply.net/ - we bought some electric outlet stuff in 2006 from them
http://www.goldmine-elec.com/ Electronic Goldmine - grab bag of surplus electronic stuff
http://www.sciplus.com/ American Science and Surplus - grab bag of surplus stuff
Kits and Educational
- http://www.solarbotics.com/ - nice small motors and kits
- http://www.makershed.com/ - nice kits
- http://electronickits.com/ - nice kits
A discussion on the DorkbotSF-blabber list shows the complexity of finding some parts, and offers some solutions:
Daniel Freschl: Does anyone know a good source of stackable headers? Digikey has the perfect part ( 2-173145-8-ND ). Unfortunately this is a non-stock part and the minimum order quantity is 1,300 units. I hate that.
Jeff Keyzer: I would probably order these from 4UCON, but they also have 1000+ minimum order on most parts.
Here's one example, taken from Adafruit's Partfinder (http://www.adafruit.com/partfinder/header): http://www.4uconnector.com/online/SearchPro.asp?FormName=ProSearch&FormAction=search&s_GroupNo=&s_keyword=18689
There's probably a 26 pin version on their site somewhere.
The nice thing about ordering 1000 headers is that you won't have to order more for a while. Oh, and the price will probably be less than 1/3rd of what you would pay at Digikey.
Joe Grand: Try Samtec (http://www.samtec.com). They offer quick turn free samples, as well.
Casey Callendrello: http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_741597_-1
Anders Nelson: You could also use SMD pin headers.
Male: http://www.digikey.com/product-detail/en/GRPB132VWQP-RC/S9013E-13-ND/1786436 (best if you want bare pins)
http://www.digikey.com/product-detail/en/AWHW26-G-SMD-R/HSL26H-ND/1001198 (best if you want positive alignment)
Josh Myer: Looks like a 2x13 version is 4ucon #20394: http://www.4uconnector.com/online/Itemadrawing.asp?fldseries=20394&seriesno_a=0118
When I ordered stacky headers, 4ucon's lead time was over a month for 1k each of 1x6 and 1x8, so budget time for this. Also, their quality was good, but the design is pretty meh. The pins themselves are flat, stamped forks, not the solid square things most people associate with pins. There was a nice site with images of the different styles of female header mechanisms, but I can't seem to find it.
David Rorex: I get pin headers in general from ebay, super cheap. Don't go to digikey, they are way overpriced there for some reason. Downside to ebay is you might wait a couple weeks for shipping from china.
Lee Sonko: Modern Device sells stacking Headers. Is this what you want? http://shop.moderndevice.com/products/6-pin-stacking-headers
If not that, they've got some others, http://shop.moderndevice.com/search?q=header
It's a small shop that caters to tinkerers, Arduinophiles and the like. Their products are delectable nerd candy. http://shop.moderndevice.com/
LED and Lighting dealers
- https://1000bulbs.com/ LED rope lights, CFL, neon, every type of lighting!
- http://digikey.com/lighting - Here is a resource that, while possibly overly technical, gives ALL the answers about electronic lighting. Check out the “Product Training Modules” on the page too!
- http://www.myledlightingguide.com/ I haven't tried them but they have a lot of big industrial LED lighting
This list lifted from the excellent Celestial Audio site on 4-11-10. Go to that site for a more updated list! Celestial Audio manufactures hardware for dimming control of LEDs through DMX.
High-current DC supplies typically needed for installations using the DMX32:
- PowerFactor (good prices)
- Jameco(go to "Power supplies", then "AC to DC switching", then "Enclosed")
- Circuit Specialists
- mpja (surplus dealer, selection varies)
Low-current DC supplies for use with the DMX48 - either cube plugged into the wall style "wall-warts" or laptop-style "tabletop supplies" - can be obtained from many places. Note that inexpensive "wall warts" may have an unregulated output, the the output voltage can be several volts higher than specified. These are not recommended.
- Circuit Specialists
- Jameco (go to "Power supplies", then "AC to DC switching", then "Wall Transformers")
- Radio Shack (or walk into your local store)
- mpja (surplus dealer, selection varies)
- All Electronics (surplus dealer, selection varies)
LED sources - LEDs are available in a fairly incredible variety of form factors and power levels. Creating LED lights from single LEDs requires a bit of knowledge of forward voltage drop range, current limiting, and series/parallel wiring. There are numerous pre-made LED lights that run directly from a specified voltage (often 12V), for these just hook them up and go. If you have a particular LED you'd like to use, email for advice.
- L.C. Led
- H.B. (In China. Very cheap, modest minimum order, single LEDs and bulbs/strips)
- LEDtronics (a good selection of 12V bulbs)
- The LED light (individual LEDs and a variety of bulbs that run on 12V)
- LED light (numerous 12V automotive direct replacements - very handy)
- LED supply
- Oznium (Ribbon, strips, modules, automotive-oriented so most products work with DMX32 board)
- More LEDs
- The LED Museum has a long list of suppliers
- JS LED Power
- Ebay (try searches like "LED bulb", "LED white", "RGB LED strip", etc.)
- LED resistor calculator - Super handy!
- Variety of links, FAQ, sources, etc.
- LED educational stuff
- LED lifetime analysis
DMX equipment sources: computer interfaces, software, standalone DMX players, consoles, etc.
- Enttec USB to DMX interfaces, Lightfactory software, standalone players
- FreeStyler: free DMX sequencer and website has a long list of DMX interface manufacturers (under Download -> interfaces)
- Doug Fleenor Design: all sorts of DMX stuff
- Lanbox: Controllers and dimmer packs
- Brookshire Software: inexpensive show control software and standalone DMX player, with CompactFlash media, audio out, and IR remote control
- SunLite: Sequencing software and standalone DMX playback & interface
- KissBox: DMX interface for Ethernet
- ELC: Playback units with remote control, interfaces with Ethernet
- BPE Solutions: all sorts of DMX to... you name it hardware
- Swisson: DMX splitter, merger, show recorder
- SIRS Electronics: an Enttec distributor, wireless DMX, a variety of stuff
- Gilderfluke: a few DMX dimmer packs and show-control systems
- Alcorn McBride: High-end show control systems
- Interactive Technologies: More high-end show control gear; wireless DMX
- Ebay (try searching for "DMX" and click on "DJ Gear & Lighting" category)
DMX technical : wiring, recommended practices, etc.
DMX setup howto/walkthroughs and D.I.Y. sources for the electronically / programatically inclined
- Decimal to Binary conversion: Convert your DMX start address to binary for the DIP switches on these boards
- Generate DMX with the Arduino board
- USB to DMX kit
- Tiny USB to DMX interface for MAX/MSP, PureData, others
General suppliers of mechanical parts
- McMaster Carr http://www.mcmaster.com/ Mail order. Has everything
- Center Hardware in San Francisco, 999 Mariposa St. San Francisco, CA 94107 415-861-1800
- Applied Industrial http://applied.com in South San Francisco, 187 Utah Ave, S San Francisco, CA 94080-6712, PH: (650) 873-6137
- Halted http://www.halted.com/ in Santa Clara and Santa Rosa and mail order
Colson Caster Wheel company has every kind of high quality caster wheel imaginable. Used by Mecha-Catbot and other Combot competitors.
Power Transmission Specialists
gears, belts, pulleys, bearings etc
- Stock Drive Products (http://sdp-si.com) mail order in New York. Gears, belts, and such super store
- Bearing Engineering in dogpatch SF http://bearingengineering.com/ 901 25th Street San Francisco, CA 94107-3531, (415)431-1500
- Bearing Agencies 415-621-8363 277 7th St San Francisco, CA 94103 (recommended 4-18-13 by Carl Pisaturo)
- Quality Bearings http://qbcbearings.com/
- Make your own gears out of "spur gear rods" from McMaster.
- W.M. Berg (http://wmberg.com)
- Boston Gear (http://www.bostongear.com/)
- Rush Gears (http://rushgears.com) all manner of custom built gears
- Martin Sprocket & Gear (http://martinsprocket.com)
- Brown (http://dpbrown.com)
- PIC Design (http://www.pic-design.com) Gears, Racks, Positioning Tables, Linear Slides, Acme Lead Screws, Modular Framing Elements, Shafts, Bearings, Precision Hardware etc
- Motion Industries (http://www.motionindustries.com)
- Inexpensive but high quality plastic gears: http://servolink.com/
- plastic gears and other things http://www.kelvin.com/
- http://www.maxxmetals.com/ in San Carlos 650-654-1500. Sheet metal, bars, and the such. They'll deliver your metal to you inexpensively ($25 or so)
- http://www.metalsupermarkets.com in Hayward, Redwood City and online.
- Small Parts http://smallparts.com "The hardware store for researchers and developers". Has fancy metals, tools, fittings and more
- Alan Steel in Redwood City. 505 E Bayshore Rd, Redwood City, CA 94063, (650) 369-2526 8-4:30pm m-f
- Good cheap place for 2" pipe among other things. It's a hardware store - Good View Roofing and Building 1320 Marin Street, SF CA 94124 282-9748
- Bayshore Metals. All kinds of steel, aluminum etc. They have a fab shop and sell short bits too, 244 Napoleon St, San Francisco, CA 94124 415-647-7981
- http://www.onlinemetals.com/ - Pretty convenient and the shipping isn't too bad.
- Bay Area Iron Works Supplier http://www.bayareaironworksupplier.com - 1440 Egbert Avenue
San Francisco, CA 94124 - Their selection is not incredible, but for typical round and square tube sizes in mild steel, they should be fine. Last I checked, they don't accept credit cards. They will deliver in SF. Not all of their staff speak English, but it usually doesn't take too long to find someone who does.
- http://www.pdmsteel.com - PDM delivers, but only to business locations. Their prices are good
Welding and Metal Supplies
- http://weldingsupply.com sells aluminum TIG electrodes and other items at 1/5 the price of Praxair and Airgas. Yeah, $5/lb instead of $25/lb. Lee is very happy with all his purchases there including The Box Shop's TIG welder in 2007. Note that it can take 10 days for products to arrive by mail.
- http://www.lehighvalleyabrasives.com mail order flap disks, grinding wheels and such
Cutting Metal and Other Things
- Seaport Stainless in Richmond for CNC laser cutting - recommended by Jim Mason 10-21-12
- Tech Shop in San Francisco & Menlo Park - DIY (Do it Yourself) laser cutting and water jet cutting
- The Box Shop - CNC plasma cutter
Metal Patina Suppliers
Sculpt Nouveau is a defacto place to get lots of chemicals for metal patinas. Located in southern California.
Art Chemicals is the other defacto defacto place for metal patinas. Located in San Leandro, California.
Welding and Metal sites from Quut.com
lifted from  on 5-5-10
Action Metal Recycling
(aka Fass Metals)
(510) 236-2488 385 Pittsburg Ave
Richmond, CA 94801
Sa 8-11 Decent collection of sheet, tube, square, etc. But the pricing is quirky - they seem to charge whatever the guy running the scale feels like.
M. Maselli & Sons, Inc.
Fax: (707) 763-6964
email@example.com 519 Lakeville
Petaluma, CA 94952
Mo-Fr 7:30-5, Sa 7:30-12 Nearly 6 acres of scrap & hardware. Great place, well organized. Good source of hardware also. Open Saturdays until noon. Somewhat expensive for scrap, but perhaps worth it for the organization, help, cleanliness of the place.
Fax: (510) 525-8209 536 Cleveland Ave
Albany, CA 94710-1007
(map) Big steel yard. They sell new steel only - most if it's in 20' lengths, so bring a big truck or a saw. They charge $7.50 a cut if you need it. They have a small selection of welding supplies also. They seem somewhat gruff dealing with non-trade, non-pro; so know what you want before you go there.
Alco (They have a really good scrap metal bin according to Branly Cadet!)
Fax: (510) 562-1354
www.alcometals.com 1092 Doolittle Dr.
San Leandro, CA 94577
Sat 8-12 all metals new and used
(510) 535-1809 800 51st Ave
Oakland, CA 94601-5627
(map) short order shearing etc
707-584-8401 244 Mountain View
Santa Rosa, CA
(map) odd & arcane scrap
Bay Area Ironworks Suppliers
(415) 822-7844 1440 Egbert Ave
San Francisco, CA
(map) neighborhood of ornamental iron
(800) 533-2493 244 Napoleon
San Francisco, CA 94124-1017
(map) all metals new
Circosta Iron & Metal
(415) 282-8568 1801 Evans Ave
San Francisco, CA 94124
(map) good big scrapyard
 no longer sells scrap metal to the general public.
Flynn & Enslow
Fax: (415) 863-2635
www.flynnenslow.com 1530 17th St
San Francisco, CA 94107
(map) perforated and expanded metals
J.C. Metal Specialists, Inc
Fax: (415) 822-6132
firstname.lastname@example.org 2708 Ingalls Street
San Francisco, CA 94124
(map) over 25 years old
email@example.com 2301 Industrial Parkway West
(map) Chain of franchise stores. Good source of specialty forms, sizes & alloys.
firstname.lastname@example.org 2999 Spring Street
(map) Chain of franchise stores.
email@example.com 705 Comstock Street
(map) Chain of franchise stores.
Van Bebber Brothers Inc.
firstname.lastname@example.org 729 Petaluma Blvd. South
Petaluma, CA 94953
(map) major steel supplier, great prices
ACE Ellis Hardware
(510) 653-4365 5424 Martin Luther King
Oakland, CA 94609
(map) tell them what you want, they go get it
Pagano's ACE hardware
(510) 522-1345 1100 Lincoln Ave
Alameda, CA 94501
(map) excellent selection
Pastime ACE hardware
(510) 526-6615 10057 San Pablo Ave
(map) excellent selection
Fax: (415) 552-0796
email@example.com 1122 Harrison
San Francisco, CA 94103
(map) designer & specialty fasteners
California Caster & Handtruck Co
Fax: (415) 552-0463
www.californiacaster.com 1400 17th Street
San Francisco, CA 94107
(map) casters, levelers, spring plungers
Rockler Woodworking & Hardware
Fax: (925) 521-1802
Store25@Rockler.com 541 Contra Costa Blvd
(map) specialty hinges, rollers, drawer sliders
Atlas Welding Supply Inc.
(510) 524-5117 1224 6th St
Berkeley, CA 94710
(map) helpful welding store with student discount
Mavry Welding Supply
(510) 433-0240 2919 Union St
Alliance Gas Products
www.alliance-gas.com 727 77th Ave
Oakland, CA 94621
Alliance Gas Products
www.alliance-gas.com 2001 Peralta Street
Oakland, CA 94607
Praxair Distribution Inc.
Fax: (510) 547-7512
www.praxair.com 1171 Ocean Ave
Oakland, CA 94608
Fax: (510) 632-7898
www.airgas.com 555 Julie Ann Way
Oakland, CA 94621
(510) 527-4080 635 Gilman
Fax: (510) 234-0245
firstname.lastname@example.org 600 Hoffman Blvd.
Richmond, CA 94804
Shop Rental and Instruction
www.techshop.ws 120 Independence Dr
Menlo Park, CA 94025
(map) Membership-based workshop with monthly/annual membership fee. Full access to all machines and facilities with membership. (As of 2009) Full metal and machine shop with two 175 amp MIG welders, one 200 amp TIG welder with two welding stations. Safety and basic use class required ($45) before you can use the equipment. Additional instruction is available for $80 for a two-hour class. Community focus in on "DIY" projects, shaped by "Make" magazine.
www.thecrucible.org 1260 7th Street
Oakland, CA 94607
(map) Course-based workshop space. Offers classes in MIG, TIG, Oxyacetylene welding & metal fabrication. You need to purchase a course to use the machines, after which you can purchase "lab time". Memberships available, which give you a discount on the classes. Classes are $375.00 for a 16-hour course, either two weekend days, or 5 week weekday evenings. Community focus is on metal and fire art, shaped by "Burning Man" projects.
www.laney.peralta.edu 900 Fallon Street
Oakland, CA 94607
(map) Offers welding courses for $55 a credit hour. Open lab for current students. Best value in instruction. Community focus is on preparation for a professional welding career.
http://poofersupply.com/ Supplies for amateur flame effects artists by Propaniac
Apex Electronics north of Los Angeles. Gregory MacNicol says he can spend a whole day browsing there. Tiny to giant electro and mechanical junk.
Maselli's in Petaluma. Hardware store in front; huge surplus yard in back and metal shop in the middle.
Check valves - Have had problems with standard check valves (all ball/spring types), both for liquid and gas applications. Manufactures include parker, nibco, and cambell. Recommend looking at swing type check valves and non return valves. see the nibco T-453-B
propanefirNOSPAMeguy@charter.net / Skarface writes: If anyone ever has a need for large quantities of old propane cylinders from 10# to 100# (2.5 to 25 gallon) I have a place in Reno where I can get hundreds of them for free...
Coliseum Flea Market in Oakland - Thursday and Sunday. Used tools, lots of great junk, bicycles
Oakland Flea Market at Laney College - Weekends. better for houseware-type stuff than Coliseum Flea Market
Many Small shops on Mission between 19th and 24th - super cheap backpacks, electrical cords, socks, locks
http://www.micromark.com/ - the small tool specialists
CAL Overstock & Surplus Den surplus UC Berkeley Campus property. "Our sales include, but are not limited to office furniture, computers, laptops, vehicles, laboratory equipment, small machinery, vehicles
Recycled and Inexpensive Stuff
This list originally from BManUpdate:V11:#11:RESOURCES
- The Reuse People (Oakland) http://www.thereusepeople.org
- The Reusable Lumber Co. (Woodside) http://www.reusablelumber.com
- Building Resources (SF) http://www.buildingresources.org
- Urban Ore (Berkeley) http://www.urbanore.citysearch.com
- Garbage Reincarnation (Santa Rosa) http://www.garbage.org/index.htm
- Caldwell's (New & some used. SF) http://www.caldwells.com
- Whole House Bldg Supply (E. Palo Alto) http://www.driftwoodsalvage.com
These local organizations sell inexpensive donated materials for art projects:
- S.C.R.A.P.: http://www.scrap-sf.org
- The East Bay Depot for Creative Reuse http://www.east-bay-depot.org
The Build it Green Product and Service Directory also provides some useful information:
Even more sources for cheap and free stuff:
- San Mateo Recycleworks: http://www.recycleworks.org/cgi-bin/bin/user/searchdatabases.pl
- South Bayside Waste Management Authority's Rethink Waste site: http://www.rethinkwaste.org/index.php
These online exchanges are FULL of people trading or selling useful used goods:
- FreeCycle http://www.freecycle.org
- CalMax http://www.ciwmb.ca.gov/calMAX
- Craigslist http://www.craigslist.org
Plastics and Fiberglass
- Douglas and Sturgess 730 Bryant st
- Tap Plastics
- Royal Plastics in oakland
Here's Gaspos Guide to Fiberglass (from a 3-19-09 post to Dorkbots-blabber)
Recommended Inexpensive (and/or Cheap) Soldering Irons for Electronics
- Sparkfun AT936B (this model retired, replaced by Sparkfun Soldering Iron Variable Temperature 50W) - $40 cheap! for a high quality temperature controlled soldering iron that comes with a pointy tip great for thru-hole and smaller electronics work. Lee bought one of these for The Crucible's Kinetics Department November 2011 and it has stood up to a year of use and abuse for almost a year now and still looks great. We'll be getting more. It is a quality knock-off of the Hakko 936.
- Stahl Tools STSSVT Variable Temperature Soldering Station $15 - The Crucible Kinetics Department uses these as our workhorse irons. They work pretty good but start to fail (tips go bad, don't heat evenly) after a while (mostly because they aren't temperature controlled). We'll probably slowly replace them with the Sparkfun 936B.
- 50 Watt Soldering Iron, Adjustable, temperature controlled from MPJA $13 (recommended by Peef). Lee bought one but didn't love it. The tip never wetted quite as well as he wanted. And Lee broke it one day by pushing on the tip during cleaning; the tip slid into the iron most of the way and the tip stayed loose ever more. Into the trash :-(
- Weller WES51 $100 - Lee has this quality, name brand, temperature controlled iron and is very happy with it.
Franciscan Hobbies 1920 Ocean Ave, 415-584-3919 http://www.franciscanhobbies.com/ . Model planes, trains and cars, balsa wood, motors etc. In business since 1946.
Local Wood Suppliers
These folks supply premium wood like veneers, exotic, etc!
- EarthSource Forest Products, was [www.pals4wood.com/ Plywood and Lumber Supply] - PALS, 1618 28th St, Oakland, CA 94608, (866) 549-9663
- Macbeath Hardwood in Berkeley, San Francisco, & San Jose
Stickers and T-Shirts
Sticker Giant has done all of our SWARM stickers and they have come out terrific!
Mitch Altman recommends Jak Prints for stickers. I see they do a groovy printed-all-over shirts too.
Getting things to stick to one another in extreme environments is a tricky science. That's why you should call the 3M Adhesives Hotline at 800-362-3550 7a-5p (http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Support/Contact-Us/). Adhesive engineers are standing by!
Or try calling the Henkel Adhesives guys (http://www.henkel.com/) maker of Loctite etc...
Enlarged photos of our art are popular sellers at fundraisers
Lee used http://mpix.com and was very happy with the quality, price and ease of using their web site. He found the http://www.whcc.com web site hard to use (it'd probably be better for professional photographers).
http://photoworkssf.com/ is on Market St. They can do quick turnaround (order online to get a discount). They cater to the "pro-sumer" market. Lee and Charlotte used them for the FLG photobook and the photos came out very well.
David Ellsworth writes: I've heard good things about http://www.mpix.com and http://www.whcc.com. If you want cheap, http://www.perfectposters.com and http://www.reliablephoto.com have low prices for big prints in their ads in the latest Pop. Photo magazine.
I've been happy with Costco, which has the advantage of 2 hour turnaround, but you need to be a member, and they only go up to 8x12 or so.
Don't forget to make small enlargements to sell, too. They sold well at the last fundraiser.
Calypso Imaging in San Jose does a good job, but they are pricey.
Picture frames from Ikea is good.
(keywords: fundraising, fundraisers, benefit, benefits)
Inexpensive Furniture and the like